The increasing popularity of VLD bullets has led RCBS® to offer a 22-degree VLD Deburring Tool. The angle allows the bullet to be seated into the case without damaging the boat-tail and ruining accuracy. The tool can be used as is, or mounted on the Trim Mate Case Prep Centre.
RCBS® Case Trimmer Pilots are tapered to guide pilot into the case mouth. The design prevents a case from wobbling when being trimmed to length. For use with RCBS® Trim Pro® Case Trimmers, Rotary Case Trimmer—2 and Rotary Case Trimmer. For use with RCBS Case Trimmers only.
Features a one-piece primer tray and integral molded primer bushings that eliminate the need for separate bushings. Ergonomic design reduces fatigue. Designed for easy changeovers, shell holders and primer trays can be changed without removing the spring and punch. Includes tray for RCBS shell holders.
The Universal Precision Case Trimmer is the same greattechnology found on the Platinum Series Case Prep and Trim Center, however, itis designed to be used with a standard drill or mounted in a drill press.Unlike conventional trimmers, the Universal Drill Trimmer requires no caliberspecific pilots or shellholders. The included collets index off the caseshoulder to trim any shouldered case from 17...
Frankford Arsenal Platinum Series Hand Deprimer. The Hand Deprimer is made of robust die cast aluminum and features our (patent pending) Universal Collet System. In just 4 easy steps you can deprime your spent brass by hand. No need to set up your press and reset your dies to deprime a few cases. This system is fully contained. It even captures the spent primers in a collection tube so...
Die cast zinc body with steel internal components Adjustable seating depths of 1 thousandth of an inch Hard stop so you can never crush a primer Primer tray with ridges for primer orientation Works with both small and large primers Comes with 12 shell holders to cover the most popular cases Heavy Duty injection molded storage case
We have developed this simple, inexpensive stuck case remover to work on most sizing dies. The unique design even works on stuck cases which have the decapping rod and expander ball stuck in the die. All components are hardened for long life and a washer is included to protect the top of your die.
This base can serve as a spare or replacement for the Original Case Trimmer; it can also be used with the Classic Case Trimmer to trim shorter cases. (5-3/8" Long) Extruded aluminum, I-beam-style base resists lathe torques. An adjustment of ½" (in ¼" increments) is built into the Original Case Trimmer, allowing its capacity to be widened before it becomes necessary to use a...
Small for .175" primers. Primer Pocket Cleaners help ensure consistent ignition and reduce the incidence of misfires by removing powder and primer residue from the primer pockets of your cases. This simple tool is easy to use: Just hold the case mouth over the Primer Pocket Center with one hand while you quickly and easily clean the primer pockets by turning the Case Trimmer handle. There's no...
Aligns primers anvil-side up and mates with the Primer Feed Tube for quick loading in the Co-Ax Primer Seater. The Primer Tube Loader aligns all primers with just a few flicks of the wrist. With a little practice, you can go from the primer box, to Primer Tube Loader, to Primer Feed Tube in as little as eight seconds!
The Power Case Trimmer fits most standard drill presses and provides a very fast way to trim cases while still maintaining accuracy. Specifications are the same as the Original Case Trimmer. The stop on your drill press spindle controls the case length. The Line-up Bar helps guarantee simple, accurate alignment of your Case Trimmer and the drill press spindle. Collets and Pilots are...
Turns any Forster hand trimmer into a power trimmer. Fits Original, Classic, or .50 BMG. Here is an easy, affordable way to turn your Forster hand trimmer into a power trimmer. Simply remove the handle from your trimmer and replace it with this adapter, then use any electric screwdriver or power drill to provide the power. The cutter shaft and the stop collar are unchanged so accurate case length...
![Forster - Standard Case Trimmer Base (5-3/8\" Long)](images/atrex/fo_ct1010-ctb101.jpg "Forster - Standard Case Trimmer Base (5-3/8\\" Long)")
![Forster - Small Primer Pocket Cleaner for .175\" Primers](images/atrex/fo_ppc175.jpg "Forster - Small Primer Pocket Cleaner for .175\\" Primers")
