7mm Seating Stem for Bench Rest Seater Die 

Improvement to Cross Bolt Die Lock Rings. A socket cap screw is now used to lock the ring in place. The improvement allows you to make fine adjustments without "pushing" on the ring as you are snugging it up. Fits any standard 7/8" x 14 dies. Forster Products has solved two problems common to many reloaders: misaligned die locking rings and damaged die threads. Either of those situations can...

Forster Expander Balls are .001″ smaller than the bullet diameter, with an estimated .001″ spring back this should leave you with .002″ bullet tension.

Soft seating of bullets is a technique used by many top competitors to overcome variables such as inconsistent seating depth and seating depth changes due to throat erosion. Soft seating of bolt action rifle ammunition is accomplished by leaving the bullet seated out far enough so it is pushed back into the case as the rifle bolt is closed. Thus, each bullet is started true to the rifling. Note:...

Soft seating of bullets is a technique used by many top competitors to overcome variables such as inconsistent seating depth and seating depth changes due to throat erosion. Soft seating of bolt action rifle ammunition is accomplished by leaving the bullet seated out far enough so it is pushed back into the case as the rifle bolt is closed. Thus, each bullet is started true to the rifling. Note:...

Die Locknut H10

No doubt about it: Forster Bench Rest dies set the standard for quality and precision. That’s why they’re the first choice of some of the world’s toughest reloading critics, including members of the U.S. Marines, U.S. Navy Seals, U.S. Army Rangers, U.S. Secret Service, and the U.S. Olympic Shooting Team. This set includes a  Full Length Sizing Die  and a standard...

FULL LENGTH SIZING DIE Because they offer maximum flexibility, most reloaders start their collection of Bench Rest® dies with full length sizers. The die sizes the case neck and body, sizes shoulder to set headspace (length), deprimes, and expands the case neck. Machined by hand with one-piece reamers. The exclusive elevated “E-Z” out expander ball system makes the difference in...

FULL LENGTH SIZING DIE Because they offer maximum flexibility, most reloaders start their collection of Bench Rest® dies with full length sizers. The die sizes the case neck and body, sizes shoulder to set headspace (length), deprimes, and expands the case neck. Machined by hand with one-piece reamers. The exclusive elevated “E-Z” out expander ball system makes the difference in...

FULL LENGTH SIZING DIE Because they offer maximum flexibility, most reloaders start their collection of Bench Rest® dies with full length sizers. The die sizes the case neck and body, sizes shoulder to set headspace (length), deprimes, and expands the case neck. Machined by hand with one-piece reamers. The exclusive elevated “E-Z” out expander ball system makes the difference in...

FULL LENGTH SIZING DIE   Because they offer maximum flexibility, most reloaders start their collection of Bench Rest® dies with full length sizers. The die sizes the case neck and body, sizes shoulder to set headspace (length), deprimes, and expands the case neck. Machined by hand with one-piece reamers. The exclusive elevated “E-Z” out expander ball system makes the...

FULL LENGTH SIZING DIE   Because they offer maximum flexibility, most reloaders start their collection of Bench Rest® dies with full length sizers. The die sizes the case neck and body, sizes shoulder to set headspace (length), deprimes, and expands the case neck. Machined by hand with one-piece reamers. The exclusive elevated “E-Z” out expander ball system makes the...

FULL LENGTH SIZING DIE   Because they offer maximum flexibility, most reloaders start their collection of Bench Rest® dies with full length sizers. The die sizes the case neck and body, sizes shoulder to set headspace (length), deprimes, and expands the case neck. Machined by hand with one-piece reamers. The exclusive elevated “E-Z” out expander ball system makes the...

FULL LENGTH SIZING DIE   Because they offer maximum flexibility, most reloaders start their collection of Bench Rest® dies with full length sizers. The die sizes the case neck and body, sizes shoulder to set headspace (length), deprimes, and expands the case neck. Machined by hand with one-piece reamers. The exclusive elevated “E-Z” out expander ball system makes the...

FULL LENGTH SIZING DIE   Because they offer maximum flexibility, most reloaders start their collection of Bench Rest® dies with full length sizers. The die sizes the case neck and body, sizes shoulder to set headspace (length), deprimes, and expands the case neck. Machined by hand with one-piece reamers. The exclusive elevated “E-Z” out expander ball system makes the...