Forster Bench Rest Ultra Micrometer Seater Die - 6.5x47 Lapua The Ultra Micrometer Seater Die is a non-crimping style seater die (except for the 30-30) that holds the bullet and case in perfect alignment while the bullet is press-fit seated. A handy micrometer fixes the bullet seating depth to your specifications. After you have seated your bullet close to the desired depth and measured it,...

Forster Bench Rest Ultra Micrometer Seater Die - 6mm BR The Ultra Micrometer Seater Die is a non-crimping style seater die (except for the 30-30) that holds the bullet and case in perfect alignment while the bullet is press-fit seated. A handy micrometer fixes the bullet seating depth to your specifications. After you have seated your bullet close to the desired depth and measured it, simply...

Forster Bench Rest Ultra Micrometer Seater Die - 6XC The Ultra Micrometer Seater Die is a non-crimping style seater die (except for the 30-30) that holds the bullet and case in perfect alignment while the bullet is press-fit seated. A handy micrometer fixes the bullet seating depth to your specifications. After you have seated your bullet close to the desired depth and measured it, simply adjust...

Forster Bench Rest Ultra Micrometer Seater Die - 7x64 Brenneke The Ultra Micrometer Seater Die is a non-crimping style seater die (except for the 30-30) that holds the bullet and case in perfect alignment while the bullet is press-fit seated. A handy micrometer fixes the bullet seating depth to your specifications. After you have seated your bullet close to the desired depth and measured it,...

Forster Bench Rest Ultra Micrometer Seater Die - 7mm Remington Magnum The Ultra Micrometer Seater Die is a non-crimping style seater die (except for the 30-30) that holds the bullet and case in perfect alignment while the bullet is press-fit seated. A handy micrometer fixes the bullet seating depth to your specifications. After you have seated your bullet close to the desired depth and measured...

Forster Bench Rest Ultra Micrometer Seater Die - 7mm Winchester Short Magnum (WSM) The Ultra Micrometer Seater Die is a non-crimping style seater die (except for the 30-30) that holds the bullet and case in perfect alignment while the bullet is press-fit seated. A handy micrometer fixes the bullet seating depth to your specifications. After you have seated your bullet close to the desired depth...

  Forster Bench Rest Ultra Micrometer Seater Die - .338 Lapua Magnum The Ultra Micrometer Seater Die is a non-crimping style seater die (except for the 30-30) that holds the bullet and case in perfect alignment while the bullet is press-fit seated. A handy micrometer fixes the bullet seating depth to your specifications. After you have seated your bullet close to the desired depth and...

.22 Hornet Ultra Micrometer Seater

@page {margin: 96px 96px 96px 96px;}.docbody {font-family: 'Times New Roman'}p.MsoNormal, li.MsoNormal, ul.MsoNormal, div.MsoNormal{ margin-top:0px; margin-right:0px; margin-bottom: 1.0pt; margin-left:0cm;line-height:1.07; font-size:11.0pt; white-space: pre-wrap}No doubt about it: Forster Bench Rest dies set the standard for quality and precision. That’s why they’re the first choice...

This unit features an expander rod and ball and a decapping pin. It’s used with sizing dies to de-prime the case and expand the neck in bottleneck cartridges.

The RCBS® Decapping Unit de-primes the case. It features a decapping rod, pin and pin holder.

The Full-Length Sizer Die brings the case to SAAMI minimum cartridge dimensions. It sizes the outside of the case, de-primes and expands the neck to accept the bullet. The die has vents to prevent case damage caused by trapped air and for excessive lubricant. Headspace is held to minimum tolerances to avoid changing the case body length during full length sizing.

The Gold Medal Match Series comprises the finest reloading dies built by RCBS®. The Neck Bushing Sizer Die resizes only the case neck, and its changeable diameter neck bushing design has been trusted by benchrest and long-range precision shooters for years. It lets reloaders precisely set the amount of tension on the bullet, reducing work-hardening of the case neck brass, prolonging case life...

The Gold Medal Match Series comprises the finest reloading dies built by RCBS®. The Neck Bushing Sizer Die resizes only the case neck, and its changeable diameter neck bushing design has been trusted by benchrest and long-range precision shooters for years. It lets reloaders precisely set the amount of tension on the bullet, reducing work-hardening of the case neck brass, prolonging case life...

The RCBS® Seater Die seats the bullet and has a built-in roll crimper to secure the bullet at the same time.