Fix It Sticks All-in-One Torque Driver Tighten down your scope rings, mounts, actions screws, etc.while in the field, at the range, or at home. No more over or undertightening your critical components. Just turn the drive handle until the hash mark lines up with the torque valueyou need (from 15 - 65 inch-lbs). Features Accepts any standard 1/4" bit Fits into any standard 1/4" driver...
Fix It Sticks All-in-One Torque Driver Kit Featuring the Fix It Sticks All-in-One Torque Driver. Tighten down your scope rings, mounts, actions screws, etc. while in the field,at the range, or at home. No more over or under tightening your criticalcomponents. Lightweight and compact - the All-in-OneTorque Driver Kit will always be there when you need it. Kit...
@page {margin: 96px 96px 96px 96px;}.docbody {font-family: 'Times New Roman'}p.MsoNormal, li.MsoNormal, ul.MsoNormal, div.MsoNormal{ margin-top:0px; margin-right:0px; margin-bottom: 1.0pt; margin-left:0cm;line-height:1.07; font-size:11.0pt; white-space: pre-wrap}Fix It Sticks Duo Case. Has two molded bit holders that run along the bottom that are capable of holding 42 components and...
Extended Action Bit 3/16" Ball End Hex - 4" Long Custom ball end hex bit designed to tighten hard to reachscrews. Shaft of bit is 0.1875" X 4.0" long for hard toreach screws.Works with any standard 1/4" bit driver Integrates perfectly with Fix It Sticks Replaceable Editionfor field / travel use. Integrates perfectly with T-Way Wrench for shop use.
Extended Action Bit 5mm Ball End Hex - 4" Long Custom ball end hex bit designed to tighten hard to reachscrews. Shaft of bit is 0.1875" X 4.0" long for hard toreach screws.Works with any standard 1/4" bit driver Integrates perfectly with Fix It Sticks Replaceable Editionfor field / travel use. Integrates perfectly with T-Way Wrench for shop use.
Custom ball end hex bit designed to tighten hard to reachscrews. Choose 3/16" for Remington 700, AICS, etc.Choose 5/32" for Ruger 10/22 V-Block, etc.Choose 5/64" for general useChoose 1/8" for KIDD, etc.Choose 5mm for Action ScrewsChoose T30 for numerous Precision Rifles (T30 is not a BallEnd)Shaft of bit is 0.1875" X 4.0" long for hard toreach screws.Works with any standard...
Designed for the professional and competitive shooter, thissuper compact kit will help keep your long range rifle in top form while in thefield. This kit contains a comprehensive assortmentof tools designed to help maintain your rifle and tighten down youroptics, action and accessories to the correct torque. Includesthe following specialty parts / bits: Ratchet T-Handle...
Easy way to keep track of loose screws / bits when in the field. Magnetic patch attaches to front of Fix It Sticks Deluxe Case via Velcro. Velcro on the front allows patches to be attached. Patch can be used directly on case, or flipped over and used as a tray.
Access your Remington 700 firing pin quickly and easily inthe field with our compact custom bit. Remington Bolt Opener Levers the firing pin head with a "bottle opener" action Molded synthetic polymer bushing protects bolt plug from damage Metal ¼†Hex Base allows it to work with any ¼†driver Integrates perfectly with Fix It Sticks T-Handle Drivers. NOTE: Fix It...
Fix It Sticks' Rifle and Optics Toolkit with Individual Torque Limiters lets you precisely tighten down scope rings, mounts, actions, screws and more, whether you're in the field, at the range, or at home. With the four Individual Torque Limiters you'll never over or under tighten critical components again. They make it easy to hit the right torque setting the first time. The Rifle and Optics...
Fix It Sticks Scope Jack A new way to level your optic, the Fix It Sticks Scope jackworks with any 1/4 inch driver to quickly and easily level your scope to yourNATO/Pic rail. Just mount the scope jack to the NATO/pic rail under your scope and turnthe drive handle until the lifting arm engages with the flat section under yourturrets. Once the scope is level, maintain...
Get our All-In-One Torque Driver, AR15 Field Maintenance,and Accessory Bits all in one Kit! This kit contains numerous bits and accessories designed tohelp maintain your AR-15, tighten down your optics and rifle parts to thecorrect torque, and work on pistols and shotguns as well. Includes thefollowing specialty parts / bits: T-Handle Wrench All-In-One Torque Driver 1/2" Socket and Bit...
Fix It Sticks' Small Torque Limiters prevent over-tightening of fasteners. When you reach the correct in-lb of torque, you'll hear an audible "click" and the limiter will spin to prevent further torque from being applied. Each limiter accepts any standard 1/4" bit, fits into any standard 1/4" driver, including Fix It Sticks Tools or our T-Way Wrench, and tightens precisely (+/- 6% accuracy). Each...
Fix It Sticks' Small Torque Limiters prevent over-tightening of fasteners. When you reach the correct in-lb of torque, you'll hear an audible "click" and the limiter will spin to prevent further torque from being applied. Each limiter accepts any standard 1/4" bit, fits into any standard 1/4" driver, including Fix It Sticks Tools or our T-Way Wrench, and tightens precisely (+/- 6% accuracy). Each...
Fix It Sticks' Small Torque Limiters prevent over-tightening of fasteners. When you reach the correct in-lb of torque, you'll hear an audible "click" and the limiter will spin to prevent further torque from being applied. Each limiter accepts any standard 1/4" bit, fits into any standard 1/4" driver, including Fix It Sticks Tools or our T-Way Wrench, and tightens precisely (+/- 6% accuracy). Each...
Fix It Sticks' Small Torque Limiters prevent over-tightening of fasteners. When you reach the correct in-lb of torque, you'll hear an audible "click" and the limiter will spin to prevent further torque from being applied. Each limiter accepts any standard 1/4" bit, fits into any standard 1/4" driver, including Fix It Sticks Tools or our T-Way Wrench, and tightens precisely (+/- 6% accuracy). Each...
Fix It Sticks' Small Torque Limiters prevent over-tightening of fasteners. When you reach the correct in-lb of torque, you'll hear an audible "click" and the limiter will spin to prevent further torque from being applied. Each limiter accepts any standard 1/4" bit, fits into any standard 1/4" driver, including Fix It Sticks Tools or our T-Way Wrench, and tightens precisely (+/- 6% accuracy). Each...
![Fix It Sticks - Extended Action Bit - 3/16\" Ball End Hex](images/atrex/fis-cb316b4.jpg "Fix It Sticks - Extended Action Bit - 3/16\\" Ball End Hex")
