21 st Century Arbor Press Adjustable press height Rugged, lightweight and portable designEasily mounted to loading benchRight and left handed models available Our original arbor press is designed for use with seatingand neck sizing hand dies. Carefully machined from stainless steel andaluminum, this lightweight design is perfect for easy transport to the field.Although its small size allows it...
"LS" Shell Holder Jaws, fits a variety of calibers (Press Accessory). When we originally tested our unique shell holder design, we full length sized two-hundred once-fired 300 H&H Magnum cases dry and unlubricated. We neither pulled the rims off the cases nor did we stick a case in the die. The heads of the cases and rims were unmarked by the shell holder jaws because the shell holder...
“S” Shell Holder Jaws (spare / replacement), fits a variety of calibers. When we originally tested our unique shell holder design, we full length sized two-hundred once-fired 300 H&H Magnum cases dry and unlubricated. We neither pulled the rims off the cases nor did we stick a case in the die. The heads of the cases and rims were unmarked by the shell holder jaws because the shell...
Co-Ax® Press, supplied with “S” jaws. No need to complicate the reloading process. Our Co-Ax® Press keeps it simple while still delivering famous Forster precision. The Forster Co-Ax® Loading Press comes with several unique features that help make it truly one of a kind, including: Snap-in and snap-out die changing. You can actually change from sizer die to seater die in...
The Co-Ax XL is made to accept 1″ 1/4″ Dies as well as 7/8″ dies (adaptor lock ring required (2) included with the press). The Press was designed with ELR Shooters in mind and is built with the same float advantage, quick die change and precision of the standard Co-Ax. What is different: Accepts both 1 1/4″ and 7/8″ Dies Made from a steel weldment as opposed to Cast...
Co-Ax® Press Cover (soft cover w/ drawstring). Protect your Co-Ax reloading press from dust and dirt with this attractive black cover. Top closure is a draw cord with a lock and bottom has a snug fitting elastic closure. Made from breathable 420 D Nylon which helps prevent moisture buildup.
Description Co-Ax Reloading Pr e. spare or replacement caps for the Primer Catch Cup. Note that the design changed between models B3 and B4 (introduced in 2015). The older B2 & B3 Catcher Cap had a smaller hole for the Drop Tube.
While a case is in the Quick-change Lower Shell Holder Jaws,it’s supported by spring-loaded jaws that contact the base of the cannelure formore positive extraction. The jaws are also self acting, so when a cartridge is placedin the die and the handle of the Co-AxPress is activated, the jaws can open and close on the cartridge case.When the handle is raised, the jaws automatically...
While a case is in the Quick-change Lower Shell Holder Jaws,it’s supported by spring-loaded jaws that contact the base of the cannelure formore positive extraction. The jaws are also self acting, so when a cartridge is placedin the die and the handle of the Co-AxPress is activated, the jaws can open and close on the cartridge case.When the handle is raised, the jaws automatically...
While a case is in the Quick-change Lower Shell Holder Jaws,it’s supported by spring-loaded jaws that contact the base of the cannelure formore positive extraction. The jaws are also self acting, so when a cartridge is placedin the die and the handle of the Co-AxPress is activated, the jaws can open and close on the cartridge case.When the handle is raised, the jaws automatically...
While a case is in the Quick-change Lower Shell Holder Jaws,it’s supported by spring-loaded jaws that contact the base of the cannelure formore positive extraction. The jaws are also self acting, so when a cartridge is placedin the die and the handle of the Co-AxPress is activated, the jaws can open and close on the cartridge case.When the handle is raised, the jaws automatically...
Our Shell Holder Adapter Plate allows you to use standard shell holders in place of the springloaded, universal shellholder jaws that come with our Co-Ax press. Very easy to use and facilitates reloading of some non-standard cartridges. All you need to supply is your conventional style shellholder in conjunction with this adapter.
Our customers have told us that the long handle that comes standard on our exclusive Co-Ax® single stage press delivers more leverage than necessary for several small rifle cartridges...for seating and priming operations...and for reloading most handgun calibers. Our response is a short handle that's easy to retrofit on your Forster Co-Ax® press, complete with a comfortable ball...
![Forster - \"LS\" Lower Shell Holder Jaws for Co-Ax Press](images/atrex/fo_001251.jpg "Forster - \\"LS\\" Lower Shell Holder Jaws for Co-Ax Press")
![Forster - \"S\" Lower Shell Holder Jaws for Co-Ax® Press](images/atrex/fo_001231.jpg "Forster - \\"S\\" Lower Shell Holder Jaws for Co-Ax® Press")
