Add +2 capacity to your AICS metal short action magazines and gain an advantage in high round count competitions. Lightweight and durable, only minutes to install. COMPATIBILITY Tested and compatible with MDT, AICS and Accurate-Mag AICS pattern 3.050 length metal magazines. IMPORTANT NOTES When used with MDT 10-round metal magazines, a longer spring/follower combination must be used (available...
Save your thumb with the MDT Magazine Loader. SPECIFICATIONS & FEATURES Load rounds quick and easy Spring actuated feeding No hardware needed Tested and compatible with .223 and .308 family cartridges Can be used to strip unfired ammo out of the magazine by turning it around and using the plunger to pull rounds through the feedlips
These magazines are designed with a unique Double Stack toSingle Feed (DSSF) transition design for reduced overall height compared to theindustry standard. DETAILS MDT AICS-pattern metal magazines are manufactured from highstrength steel, nitrided, and finished inside and outside with Cerakote Elitefor ultimate durability, corrosion resistance, and friction reduction. ...
Product detailsThese magazines are designed with a unique Double Stack to Single Feed (DSSF) transition design for reduced overall height compared to the industry standard. DETAILSMDT AICS-pattern metal magazines are manufactured from high strength steel, nitrided, and finished inside and outside with Cerakote Elite for ultimate durability, corrosion resistance, and friction reduction....
MDT's metal magazines are manufactured from high strength steel, and nitride treated for ultimate durability. The short action magazines are offered in standard Accuracy International Chassis System (AICS) pattern 3.050" nominal length. The internal length is 2.890".
DETAILS MDT Metal 300PRC is a CIP 3.850" length magazines thatis manufactured from high strength steel and finished with Cerakote Elite forthe ultimate in durability and corrosion resistance. Compatible with AICSpattern DBM chassis and bottom metals which accept 3.850" CIP lengthmagazines. This magazine has a 5 round capacity based on magnum rounds. IMPORTANT The standard length long...
These magazines are designed with a unique Double Stack toSingle Feed (DSSF) transition design for reduced overall height compared to theindustry standard. Available with or without the front binder plate. Seedetails below for benefits and limitations of each version. DETAILS MDT AICS-pattern metal magazines are manufactured from highstrength steel, nitrided, and finished inside and outside with...
Product detailsThese magazines are designed with a unique Double Stack to Single Feed (DSSF) transition design for reduced overall height compared to the industry standard. Available with or without the front binder plate. See details below for benefits and limitations of each version. DETAILSMDT AICS-pattern metal magazines are manufactured from high strength steel, nitrided, and finished inside...
Our metal AICS magazines are manufactured from high strength steel and finished with Cerakote Elite for the ultimate in durability and corrosion resistance. The magazines are offered in .300 Winchester Magnum and .338 Lapua Magnum configurations and are compatible with AICS pattern DBM chassis and bottom metals The 300 Win Mag magazine can also be used for 7mm Rem Mag, 30.06,...
Our metal AICS magazines are manufactured from high strength steel and finished with Cerakote Elite for the ultimate in durability and corrosion resistance. The magazines are offered in .300 Winchester Magnum and .338 Lapua Magnum configurations and are compatible with AICS pattern DBM chassis and bottom metals The magazines are manufactured in multiple lengths. 3.850" 338 LM...
MDT Metal Magazines MED magazine will fit in an MED bottom metal or MED chassis. Outside length of the magazine - 3.330" Overall Cartridge Length -3.240"
Our AICS-pattern metal magazines are manufactured from high strength steel, nitrided, and finished inside and outside with Cerakote Elite for ultimate durability, corrosion resistance, and friction reduction. 10-Round Magazines: 3.055” Outside Length 2.960” max cartridge overall length (COAL) without binder plate (see limitations below) 3.90” Rear Height The 10-round...
MDT AICS-pattern metal magazines are manufactured from high strength steel, nitride-finished and coated with Cerakote Elite for ultimate durability and performance. The 6mm BR magazine is offered for the 6mm BR and family of cartridges, and are available in 12 round capacity. These magazines are designed with a unique Double Stack to Single Feed (DSSF) transition design for reduced overall height...
MDT Detachable box magazines are designed to fit the MDT TAC21 and LSS Chassis systems, as well as many other M24 type chassis and bottom metals. Manufactured from high quality Polymer and uses a tempered steel spring. Available in .223 and .308 We put our magazines through vigorous testing. We have used a high quality strength polymer with a high glass content to ensure durability and strength....
