Equipment

Property categories:
> Reloading


Product Image Item Name  (Desc.) Price
Hornady - Shell Holder #16 - .223

Hornady - Shell Holder #16 - .223

Hornady Shell Holders are precision machined from solid steel then heat treated to perform flawlessly for the life of the press. Hornady steel shell holders also fit most other brands of reloading presses.
$6.50

... more info

Hornady - Shell Holder #23 - 7.62x53/54R

Hornady - Shell Holder #23 - 7.62x53/54R

Hornady Shell Holders are precision machined from solid steel then heat treated to perform flawlessly for the life of the press. Hornady steel shell holders also fit most other brands of reloading presses.
$6.50

... more info

Hornady - Shell Holder #43 - .338 LM

Hornady - Shell Holder #43 - .338 LM

Hornady Shell Holders are precision machined from solid steel then heat treated to perform flawlessly for the life of the press. Hornady steel shell holders also fit most other brands of reloading presses.
$6.50

... more info

Hornady - Shell Holder #6

Hornady - Shell Holder #6

Hornady Shell Holders are precision machined from solid steel then heat treated to perform flawlessly for the life of the press. Hornady steel shell holders also fit most other brands of reloading presses.
$6.50

... more info

RCBS - Case Trimmer PILOT .40 CALIBER

RCBS - Case Trimmer PILOT .40 CALIBER

RCBS® Case Trimmer Pilots are tapered to guide pilot into the case mouth. The design prevents a case from wobbling when being trimmed to length. For use with RCBS® Trim Pro® Case Trimmers, Rotary Case Trimmer—2 and Rotary Case Trimmer. For use with RCBS Case Trimmers only.
$8.00

... more info

RCBS - CASE TRIMMER SHELL HOLDER #27

RCBS - CASE TRIMMER SHELL HOLDER #27

RCBS® Trim Pro Case Trimmers feature uniquely shaped shell holders to firmly hold rifle and pistol cases in perfect alignment with the cutter. This system allows for accurate and repeatable case trimming lengths and leaves the case mouths square to the body. Trim Pro Shell Holders are numbered the same as standard shell holders to simplify identification and use. They’re available...
$10.00

... more info

RCBS - DEBURRING TOOL .17-.45 CAL

RCBS - DEBURRING TOOL .17-.45 CAL

The Deburring Tool allows the inside and outside chamfering and deburring of cases. Made of hardened steel to last a lifetime.
$26.00

... more info

RCBS - Decap Unit - .264/6.5mm

RCBS - Decap Unit - .264/6.5mm

This unit features an expander rod and ball and a decapping pin. It’s used with sizing dies to de-prime the case and expand the neck in bottleneck cartridges.
$10.00

... more info

RCBS - Decap Unit - 6.5MM T/CU

RCBS - Decap Unit - 6.5MM T/CU

The RCBS® Tapered Expander-Decapping Unit replaces the stem in RCBS expander-decapping die
$10.00

... more info

RCBS - QUICK CHANGE DROP TUBE ADAPTER

RCBS - QUICK CHANGE DROP TUBE ADAPTER

The Quick Change Drop Tube Adapter can be used to upgrade an existing Uniflow powder measure. Reloaders simply replace the Drop Tube Adapter that came with their Uniflow , which allows use of the drop tubes from the Quick Change High Capacity powder measure or Quick Change Powder Funnel.
$6.00

... more info

RCBS - QUICK CHANGE EXTENDED DROP TUBE

RCBS - QUICK CHANGE EXTENDED DROP TUBE

The Quick Change High Capacity Drop Tubes, when used with other accessories, lets reloaders preset to their favorite large capacity rifle charges, such as 110 grains for their 30-378 Weatherby or 120 grains for the 600 Nitro Express. The High Capacity Drop Tubes, in conjunction with the Quick Change Drop Tube Adaptor, allow the use of these on existing Uniflow™ or Quick Change powder...
$9.00

... more info

RCBS - QUICK CHANGE HIGH CAPACITY DROP TUBE .22-.270 SM

RCBS - QUICK CHANGE HIGH CAPACITY DROP TUBE .22-.270 SM

The Quick Change High Capacity Drop Tubes, when used with other accessories, lets reloaders preset to their favorite large capacity rifle charges, such as 110 grains for their 30-378 Weatherby or 120 grains for the 600 Nitro Express. The High Capacity Drop Tubes, in conjunction with the Quick Change Drop Tube Adaptor, allow the use of these on existing Uniflow™ or Quick Change powder...
$8.00

... more info

RCBS - Shell Holder #11

RCBS - Shell Holder #11

RCBS® Single Stage shell holders are built from hardened steel and designed to properly align the case with the reloading die in single-stage and turret presses. They’re sized to fit specific case heads and capture 0.125 inch of the case head for proper SAAMI headspacing.
$10.00

... more info

RCBS - Shell Holder #2

RCBS - Shell Holder #2

RCBS® Single Stage shell holders are built from hardened steel and designed to properly align the case with the reloading die in single-stage and turret presses. They’re sized to fit specific case heads and capture 0.125 inch of the case head for proper SAAMI headspacing.
$10.00

... more info

RCBS - Shell Holder #32

RCBS - Shell Holder #32

RCBS® Single Stage shell holders are built from hardened steel and designed to properly align the case with the reloading die in single-stage and turret presses. They’re sized to fit specific case heads and capture 0.125 inch of the case head for proper SAAMI headspacing.
$10.00

... more info

RCBS - Shell Holder #38

RCBS - Shell Holder #38

RCBS® Single Stage shell holders are built from hardened steel and designed to properly align the case with the reloading die in single-stage and turret presses. They’re sized to fit specific case heads and capture 0.125 inch of the case head for proper SAAMI headspacing.
$10.00

... more info

RCBS - Shell Holder #7

RCBS - Shell Holder #7

RCBS® Single Stage shell holders are built from hardened steel and designed to properly align the case with the reloading die in single-stage and turret presses. They’re sized to fit specific case heads and capture 0.125 inch of the case head for proper SAAMI headspacing.
$10.00

... more info

RCBS - UNIFLOW POWDER MEASURE

RCBS - UNIFLOW POWDER MEASURE

The Uniflow Powder Measure throws consistently accurate charges reload after reload. Powder pours uniformly from the measuring cylinder and into case, thereby eliminating the hazards of overloads caused by clogging when charges are dumped. The unit changes easily from charge to charge without emptying powder hopper. Note: The Powder Measure should be used in conjunction with an accurate powder...
$109.00

... more info

RCBS - VLD Deburring Tool with Handle

RCBS - VLD Deburring Tool with Handle

The increasing popularity of VLD bullets has led RCBS® to offer a 22-degree VLD Deburring Tool. The angle allows the bullet to be seated into the case without damaging the boat-tail and ruining accuracy. The tool can be used as is, or mounted on the Trim Mate Case Prep Centre.
$22.00

... more info

Whidden Gunwords - Case Guage .284 Win

Whidden Gunwords - Case Guage .284 Win

Case Gauge .284 Win (6-284, 6.5-284, 22-284, 30-284, 35-284, 270-284, 338-284) Whidden Gunworks is pleased to offer Case Gauges to compliment your handloading process. The Case Gauges can be used to determine your own rifle’s headspace and whether or not it falls within SAAMI specifications. Additionally they can be used to determine the headspace of factory ammunition or hand loads and see...
$62.00

... more info

Whidden Gunworks - Case Gauge 338 Lapua Mag

Whidden Gunworks - Case Gauge 338 Lapua Mag

Case Gauge 338 Lapua Mag Whidden Gunworks is pleased to offer Case Gauges to compliment your handloading process. The Case Gauges can be used to determine your own rifle’s headspace and whether or not it falls within SAAMI specifications. Additionally they can be used to determine the headspace of factory ammunition or hand loads and see how they compare with your own chamber. The Case...
$62.00

... more info

Whidden Gunworks - Case Gauge 6.5 Creedmoor

Whidden Gunworks - Case Gauge 6.5 Creedmoor

Case Gauge 6.5 Creedmoor (6mm Creedmoor) Whidden Gunworks is pleased to offer Case Gauges to compliment your handloading process. The Case Gauges can be used to determine your own rifle’s headspace and whether or not it falls within SAAMI specifications. Additionally they can be used to determine the headspace of factory ammunition or hand loads and see how they compare with your own...
$62.00

... more info

Whidden Gunworks - Case Gauge 6.5x547 Lapua

Whidden Gunworks - Case Gauge 6.5x547 Lapua

Case Gauge 6.5x547 Lapua (6x47, 20x47, 22x47, 30x47) Whidden Gunworks is pleased to offer Case Gauges to compliment your handloading process. The Case Gauges can be used to determine your own rifle’s headspace and whether or not it falls within SAAMI specifications. Additionally they can be used to determine the headspace of factory ammunition or hand loads and see how they compare with...
$62.00

... more info

Whidden Gunworks - Case Gauge BR

Whidden Gunworks - Case Gauge BR

Case Gauge BR (20BR, 22BR, 30BR, 6MM BR, 7MM BR) Whidden Gunworks is pleased to offer Case Gauges to compliment your handloading process. The Case Gauges can be used to determine your own rifle’s headspace and whether or not it falls within SAAMI specifications. Additionally they can be used to determine the headspace of factory ammunition or hand loads and see how they compare with your...
$62.00

... more info

Whidden Gunworks - Case Guage .223 Rem

Whidden Gunworks - Case Guage .223 Rem

Case Gauge .223 Rem (17-223, 20 Practical, 223 Wylde, 5.56 NATO, 6X45) Whidden Gunworks is pleased to offer Case Gauges to compliment your handloading process. The Case Gauges can be used to determine your own rifle’s headspace and whether or not it falls within SAAMI specifications. Additionally they can be used to determine the headspace of factory ammunition or hand loads and see how...
$62.00

... more info

Whidden Gunworsk - Case Gauge .308 Family

Whidden Gunworsk - Case Gauge .308 Family

Case Gauge .308 Family (7.62 NATO, 7.62x51, 243 Win, 260 Rem, 338 Federal, 358 Win) Whidden Gunworks is pleased to offer Case Gauges to compliment your handloading process. The Case Gauges can be used to determine your own rifle’s headspace and whether or not it falls within SAAMI specifications. Additionally they can be used to determine the headspace of factory ammunition or hand loads...
$62.00

... more info