21st Century - Caliber Specific Expander Mandrel - .256" Our caliber specific expander mandrels are available in.0005†increments in calibers 22 to 338 and will range from .001†above bulletdiameter to at least .003†below bullet diameter depending on caliber. This will allow the reloader to find properneck tension to fine-tune their loads. The oversized expanders...
21st Century - Expander Mandrel .27 Cal 21st Century Shooting Expander Mandrels when used with our21st Century Shooting Expander Die Body will expand the case neck for properfit on the turning arbor. Precision CNC machined from very high grade stainlesssteel. Our Mandrels and Arbors are engraved: E = ExpandingMandrel T = Turning Arbor
These are the highest quality matched scope rings you can put on your rifle. Precisely CNC machined to the tightest tolerances so lapping is not required. These rings are made from 7075 aluminum to save weight and are hard anodized to maintain strength and rigidity. The cross bolts and nuts are machined from 4140 chromoly steel and hardened using a nitriding process. Height is measured...
Adversus Scope Mount -Diameter 34 Height 38 40 MOA Black The Adversus™ series, compatible with any 1913 or NATO rail, is optimized for its use on sniper rifle platforms and target users from military forces, law enforcement and shooting sports. The ScopeLink™ interfaces, situated all over the base and caps, make it acts as a modular system configurable by attaching multiple...
Adversus™ Scope Mount Gen 2 Diameter 30mm - High (38mm/1.5") - 0MOA - Black The Adversus™ Scope mount series, compatible with any 1913or NATO rail, is optimized for its use on sniper rifle systems and targetsusers from military forces, law enforcement and shooting sports. The ScopeLink™ interfaces, situated all over the mount, makeit acts as a modular system...
Adversus™ Scope Mount Gen 2 Diameter 30mm - Low (28mm/1.1") - 0MOA - Black The Adversus™ Scope mount series, compatible with any 1913or NATO rail, is optimized for its use on sniper rifle systems and targetsusers from military forces, law enforcement and shooting sports. The ScopeLink™ interfaces, situated all over the mount, makeit acts as a modular system configurable...
Adversus™ Scope Mount Gen 2 Diameter 34mm - High (38mm/1.5") - 0MOA - Black The Adversus™ Scope mount series, compatible with any 1913or NATO rail, is optimized for its use on sniper rifle systems and targetsusers from military forces, law enforcement and shooting sports. The ScopeLink™ interfaces, situated all over the mount, makeit acts as a modular system...
Adversus™ Scope Mount Gen 2 Diameter 34mm - High (38mm/1.5") - 20MOA - Black The Adversus™ Scope mount series, compatible with any 1913or NATO rail, is optimized for its use on sniper rifle systems and targetsusers from military forces, law enforcement and shooting sports. The ScopeLink™ interfaces, situated all over the mount, makeit acts as a modular system...
Adversus™ Scope Rings Gen 2 Diameter 30mm - Low (28mm/1.1") - Black The Adversus™ scope rings series, compatible with any 1913or NATO rail, is optimized for its use on sniper rifle systems and targetsusers from military forces, law enforcement and shooting sports. The ScopeLink™ interfaces, situated all over the rings, makethem act as a modular system configurable by attaching...
Adversus™ Scope Rings Gen 2 Diameter 30mm - Medium (34mm/1.34") - Black The Adversus™ scope rings series, compatible with any 1913or NATO rail, is optimized for its use on sniper rifle systems and targetsusers from military forces, law enforcement and shooting sports. The ScopeLink™ interfaces, situated all over the rings, makethem act as a modular system configurable by...
PSR Rings Diameter 34, Height 34, Black The PSR™ scope rings series is compatible with any 1913 or NATO rail and features ScopeLink™ interfaces situated on the caps that allow the mounting of multiple optical accessories. In this latest generation this series sees improved reliability under stress conditions and the addition of a recoil lug, a bubble level, a new one-screw...
PSR Rings Height 30 Diameter 26, Black The PSR™ scope rings series is compatible with any 1913 or NATO rail and features ScopeLink™ interfaces situated on the caps that allow the mounting of multiple optical accessories. In this latest generation this series sees improved reliability under stress conditions and the addition of a recoil lug, a bubble level, a new one-screw...
PSR™ Scope rings Diameter 1 inch - Height 34mm/1.34" The PSR™ scope rings series is compatible with any 1913 orNATO rail and features a ScopeLink™ interface situated on one cap that allowsthe mounting of multiple optical accessories. The GEN II improves overall reliabilityunder stress conditions introducing recoil lugs and a new one-screw clampingsystem which speeds up the...
PSR™ Scope rings Diameter 30mm - Extra Low (26mm/1.") The PSR™ scope rings series is compatible with any 1913 orNATO rail and features a ScopeLink™ interface situated on one cap that allowsthe mounting of multiple optical accessories. The GEN II improves overall reliabilityunder stress conditions introducing recoil lugs and a new one-screw clampingsystem which speeds up the...