Whidden Gunworks reloading dies are the best way to be sure you are getting the most out of your time at the reloading bench. If you want maximum precision for your favorite rounds – including many wildcat rounds – you need the tools we build into each one.  Both the Whidden Bushing Die and Whidden Standard Die are manufactured to tolerances that exceed most expectations....

Forster created the first die of its kind on the market, and it’s still the best straight-line Seater Die anywhere. The sliding Die Chamber has a concentric bullet channel just slightly larger than the bullet diameter. This tight fit ensures straight-line (co-axial) seating. The hand-polished Bullet Seating Stem provides consistent reloads. The Seater Die adapts to most standard reloading...

The Bushing Full Length Sizing Die offers advanced precision by allowing you to precisely control the amount of neck sizing tension in your reloaded brass while sizing the body and bumping the shoulder.   This die improves accuracy and prolongs case life because the case’s shoulder and body is sized down just enough to fit in a minimum-sized SAAMI rifle chamber, and bushing limits...

The Bushing Full Length Sizing Die offers advanced precision by allowing you to precisely control the amount of neck sizing tension in your reloaded brass while sizing the body and bumping the shoulder.   This die improves accuracy and prolongs case life because the case’s shoulder and body is sized down just enough to fit in a minimum-sized SAAMI rifle chamber, and bushing limits...

Forster Full Length Bench Rest Sizing Die for 7mm PRC Remington Short Action Ultra Magnum Produces ammunition that has a “glove fit” to your chamber.Use after each firing or after several firings, when the resulting brass flowwill require the case to be full-length sized. Sizes the case neck, shoulder, and bodyDeprimes and expands the case neckAllows the case to be re-chambered in a...

#1 Sizer Die Spindle

Sizer Die Spindle #14 

Sizer Die Spindle #17 

Sizer Die Spindle #8

6mm Remington Micrometer Seating Die

Hornady® Match™ Grade Dies give you total control over necktension in the resizing process. These dies feature the ability to useinterchangeable, self-centering neck size bushings that eliminate the chance ofover sizing your case necks and overworking the brass.* Tight tolerances at thepress translate into tighter groups at the range. See below for a listing ofavailable dies and...

.224 Valkerie Bush Dies Set

Soft seating of bullets is a technique used by many top competitors to overcome variables such as inconsistent seating depth and seating depth changes due to throat erosion. Soft seating of bolt action rifle ammunition is accomplished by leaving the bullet seated out far enough so it is pushed back into the case as the rifle bolt is closed. Thus, each bullet is started true to the rifling. Note:...

.224 Expander Ball

Forster Expander Balls are .001″ smaller than the bullet diameter, with an estimated .001″ spring back this should leave you with .002″ bullet tension.