Scope Bases

Property categories:
> Optics


Product Image Item Name  (Desc.) Price
EGW - Base - Winchester XPR Short Action 20MOA

EGW - Base - Winchester XPR Short Action 20MOA

Base, Winchester XPR SA 20MOA
$53.00

... more info

EGW - Base -Swedish Mauser 3 Hole for Strip Clip Undrilled 0 MOA

EGW - Base -Swedish Mauser 3 Hole for Strip Clip Undrilled 0 MOA

Machined From:  Domestic 6061 T6 Extruded Aluminum Finish:  Matte Black Only Mounting Hardware:  Hex Head Screws and Wrench Provided Overall Length of Mount:  6.670" *The center spread is the distance between the two middle holes, center to center, on your receiver. This mount is specifically for the Swedish Mauser with the stripper clip hump.  This mount comes standard...
$47.00

... more info

EGW - Base -Swedish Mauser 3 Hole for Strip Clip Undrilled 20MOA

EGW - Base -Swedish Mauser 3 Hole for Strip Clip Undrilled 20MOA

Machined From:  Domestic 6061 T6 Extruded Aluminum Finish:  Matte Black Only Mounting Hardware:  Hex Head Screws and Wrench Provided Center Spread:  4.275" Overall Length of Mount:  6.670" The center spread is the distance between the two middle holes, center to center, on your receiver. This mount is specifically for the Swedish Mauser with the stripper clip hump. ...
$53.00

... more info

EGW -Base - Remington 700, 722, 40x Dual Ext Short Action 20 MOA

EGW -Base - Remington 700, 722, 40x Dual Ext Short Action 20 MOA

Machined From: 6061 T6 Aluminum Finish: Matte Black Only Hardware:  Hex head screws and wrench provided Center Spread:  4.485" Overall Length:  7.064" Height:  .395" The bolt pattern on our Remington 700 Long Action mount fits Long Action Remington 700 rifles. Our F-Class mounts are extended out the front to accommodate prone shooting allowing the scope to be set further...
$77.00

... more info

EGW -Base - Steel HD Remington 700, 722, 40x Short Action 20 MOA

EGW -Base - Steel HD Remington 700, 722, 40x Short Action 20 MOA

Machined From:  4140 Carbon Steel Finish:  Parkerized Compatible with Picatinny or Weaver scope rings.  Mounting Hardware:  Socket Head Torx® Screws and Wrench Provided Center Spread:  3.627" Overall Length of Mount:  6.276" These bases sit at approximately 0.35” high. Picatinny cross slots run the full length of the rail, which gives the shooter...
$135.00

... more info

EGW 80602

EGW 80602

Base, HD Winchester STD 20MOA
$89.00

... more info

Farrell Industries - Rail, Borden Alpine 20MOA

Farrell Industries - Rail, Borden Alpine 20MOA

Farrell Industries 20MOA Rail for Borden Alpine Action
$175.00

... more info

Farrell Industries - Rail, Borden Timberline 20MOA

Farrell Industries - Rail, Borden Timberline 20MOA

Farrell Industries 20MOA Rail for Borden Timberline Action
$175.00

... more info

Leopold - Base, Mark 4 Browning A-Bolt LA 20MOA

Leopold - Base, Mark 4 Browning A-Bolt LA 20MOA

Leupold® mounts are every bit as rugged and dependable as the Leupold optics they’re intended to secure. With a huge variety of mounting systems, for nearly every type of firearm under the sun, you’re sure to find the perfect match for you firearm, and your style of shoot
$93.00

... more info

Leopold - Base, Mark 4 Browning A-Bolt SA 20MOA

Leopold - Base, Mark 4 Browning A-Bolt SA 20MOA

Leupold® mounts are every bit as rugged and dependable as the Leupold optics they’re intended to secure. With a huge variety of mounting systems, for nearly every type of firearm under the sun, you’re sure to find the perfect match for you firearm, and your style of shoot
$93.00

... more info

Leopold - Base, Mark 4 Rem 700 LA 20MOA

Leopold - Base, Mark 4 Rem 700 LA 20MOA

Leupold® mounts are every bit as rugged and dependable as the Leupold optics they’re intended to secure. With a huge variety of mounting systems, for nearly every type of firearm under the sun, you’re sure to find the perfect match for you firearm, and your style of shoot
$93.00

... more info

Leopold - Base, Mark 4 Remington 700SA 1-pc. - 8-40 Adaptable

Leopold - Base, Mark 4 Remington 700SA 1-pc. - 8-40 Adaptable

Leupold® mounts are every bit as rugged and dependable as the Leupold optics they’re intended to secure. With a huge variety of mounting systems, for nearly every type of firearm under the sun, you’re sure to find the perfect match for you firearm, and your style of shoot
$93.00

... more info

Leopold - Base, Mark 4 Savage 10/110 Round Back LA 20MOA

Leopold - Base, Mark 4 Savage 10/110 Round Back LA 20MOA

Leupold® mounts are every bit as rugged and dependable as the Leupold optics they’re intended to secure. With a huge variety of mounting systems, for nearly every type of firearm under the sun, you’re sure to find the perfect match for you firearm, and your style of shoot
$93.00

... more info

Leopold - Base, Mark 4 Savage 10/110 Round Back SA 20MOA

Leopold - Base, Mark 4 Savage 10/110 Round Back SA 20MOA

Leupold® mounts are every bit as rugged and dependable as the Leupold optics they’re intended to secure. With a huge variety of mounting systems, for nearly every type of firearm under the sun, you’re sure to find the perfect match for you firearm, and your style of shoot
$93.00

... more info

Leopold - Base, Mark 4 Tikka T3 LA 20MOA

Leopold - Base, Mark 4 Tikka T3 LA 20MOA

Leupold® mounts are every bit as rugged and dependable as the Leupold optics they’re intended to secure. With a huge variety of mounting systems, for nearly every type of firearm under the sun, you’re sure to find the perfect match for you firearm, and your style of shoot
$93.00

... more info

Leopold - Base, Mark 4 Weatherby Vanguard/Mark V LA 20MOA

Leopold - Base, Mark 4 Weatherby Vanguard/Mark V LA 20MOA

Leupold® mounts are every bit as rugged and dependable as the Leupold optics they’re intended to secure. With a huge variety of mounting systems, for nearly every type of firearm under the sun, you’re sure to find the perfect match for you firearm, and your style of shoot
$93.00

... more info

Leupold - Mark 4 Integral Mounting System 1"

Leupold - Mark 4 Integral Mounting System 1"

The Leupold Integral Mounting Systems (IMS) family quickly and easily eliminates the two most common issues faced when mounting standard riflescopes to AR-style rifles; scope height and eye relief. From the Mark 1™ to the Mark 4®, each aluminum IMS cantilever design mounts directly to the firearm’s Mil-Spec 1913/Picatinny to raise the scope and push it forward, eliminating the...
$130.00

... more info

MDT - Picatinny Rail 5" with Flush Cup Sling Mounts

MDT - Picatinny Rail 5" with Flush Cup Sling Mounts

Picatinny Rail 5" with Flush Cup Sling Mounts
$22.99

... more info

MDT - Scope Base - High - ESS Compatible - Rem700 SA - FDE

MDT - Scope Base - High - ESS Compatible - Rem700 SA - FDE

MDT Precision Scope Mounting Rail for the ESS Chassis with Pi catinny railed forend: -20 MOA (5.93 mil) forward slope -CNC machined from solid billet 6061-T6 aircraft grade aluminum -Integral recoil shoulder with elongated screw holes for positive contact with receiver ring -Mil-STD 1913 Spec rail -Torx hardware included (#6-48), base drilled to also accommodate #8x40 screws. -Mil-Spec Type III...
$64.99

... more info

MDT - Scope Base - Picatinny Rail for Rem 700 SA - Black

MDT - Scope Base - Picatinny Rail for Rem 700 SA - Black

MDT Precision Scope Mounting Rail 20 MOA (5.93 mil) forward slope CNC Machined from solid billet 6061-T6 aircraft grade aluminum Integral recoil shoulder with elongated screw holes for positive contact with receiver ring Mil-STD 1913 spec rail Torx hardware included (#6-48), base drilled to also accomodate #8-40 screws Mil-Spec Type III hard anodized Height 0.335" (Remington 700 top...
$49.99

... more info

Murphy Precision - Rem 700SA, BASE, 20MOA, TITANIUM, BLACK

Murphy Precision - Rem 700SA, BASE, 20MOA, TITANIUM, BLACK

CNC machined stainless steel or titanium Picatinny spec. scope base. Proudly made in the USA. Application: Remington 700 short action rifles. Specs: Weight: Stainless: 4.99oz, Titanium: 2.79oz Length: 5.454" Front Height: .343" Rear Height: .460" Hole Spacing (From Rear): 1st to 2nd: 0.607" 1st to 3rd: 4.242" 1st to 4th: 5.100" ** Each base ships with 6-48 stainless steel Torx screws, and a T15...
$99.00

... more info

Nightforce - 1913 Mount for Angle Degree Indicator

Nightforce - 1913 Mount for Angle Degree Indicator

1913 Mil-Spec Mount for Angle Degree Indicator The Nightforce Angle Degree Indicator takes the guesswork out of uphill and downhill shots. Calibrated in degrees, it gives you an instant readout which you can enter directly into the Nightforce ballistic software program on your pocket PC or use with a pre-printed angle drop chart. It is available in two versions: a two-piece, low-profile Mil. Std....
$78.00

... more info

Nightforce - Accessory Rail - M1913 Spotter

Nightforce - Accessory Rail - M1913 Spotter

The Nightforce Accessory Rail allows you to attach items with Military Standard 1913 picatinny bases directly to your Nightforce spotting scope. It is precisely machined, easy to attach and adds flexibility and function to your Nightforce spotting scope.
$116.00

... more info

Nightforce - Base-Rem 700 LA-1pc, 20 MOA

Nightforce - Base-Rem 700 LA-1pc, 20 MOA

An integral recoil lug machined on the bottom of the base (Rem 700 and HS700) provides a precise fit when bedded to rifle actions, preventing any movement of the base or recoil stress on screws holding the base to the receiver.Our one-piece bases are machined to exact Mil. Std. 1913 specification rail dimensions. This design allows the same scope to be used on several different rifles, always...
$155.00

... more info

Nightforce - Base-Rem 700 LA-2pc, 20 MOA

Nightforce - Base-Rem 700 LA-2pc, 20 MOA

An integral recoil lug machined on the bottom of the base (Rem 700 and HS700) provides a precise fit when bedded to rifle actions, preventing any movement of the base or recoil stress on screws holding the base to the receiver.Our one-piece bases are machined to exact Mil. Std. 1913 specification rail dimensions. This design allows the same scope to be used on several different rifles, always...
$116.00

... more info

Nightforce - Base-Rem 700 SA-1pc, 20 MOA

Nightforce - Base-Rem 700 SA-1pc, 20 MOA

An integral recoil lug machined on the bottom of the base (Rem 700 and HS700) provides a precise fit when bedded to rifle actions, preventing any movement of the base or recoil stress on screws holding the base to the receiver.Our one-piece bases are machined to exact Mil. Std. 1913 specification rail dimensions. This design allows the same scope to be used on several different rifles, always...
$155.00

... more info

Nightforce - Base, H-S 700 LA, 20 MOA 8-40 screws

Nightforce - Base, H-S 700 LA, 20 MOA 8-40 screws

HS 700 LA - 1 pc. - 20 MOA (8-40 screws) An integral recoil lug machined on the bottom of the base (Rem 700 and HS700) provides a precise fit when bedded to rifle actions, preventing any movement of the base or recoil stress on screws holding the base to the receiver.Our one-piece bases are machined to exact Mil. Std. 1913 specification rail dimensions. This design allows the same scope to be...
$155.00

... more info

Nightforce - Base, H-S 700 SA, 20 MOA 8-40 screws

Nightforce - Base, H-S 700 SA, 20 MOA 8-40 screws

Base, H-S SA 700 - 20 MOA - 8-40 thread An integral recoil lug machined on the bottom of the base (Rem 700 and HS700) provides a precise fit when bedded to rifle actions, preventing any movement of the base or recoil stress on screws holding the base to the receiver.Our one-piece bases are machined to exact Mil. Std. 1913 specification rail dimensions. This design allows the same scope to be used...
$155.00

... more info

Nightforce - Base, HS 700 SA, 40 MOA 8-40 Screws

Nightforce - Base, HS 700 SA, 40 MOA 8-40 Screws

Base, HS 700SA - 8-40 Screws - 40 MOA An integral recoil lug machined on the bottom of the base (Rem 700 and HS700) provides a precise fit when bedded to rifle actions, preventing any movement of the base or recoil stress on screws holding the base to the receiver.Our one-piece bases are machined to exact Mil. Std. 1913 specification rail dimensions. This design allows the same scope to be used...
$155.00

... more info

Nightforce - Base, Sav SA New Style - 1pc - 20 MOA - 6-48 Screw

Nightforce - Base, Sav SA New Style - 1pc - 20 MOA - 6-48 Screw

Sav SA New Style - 1 pc. - 20 MOA (6-48 screws) An integral recoil lug machined on the bottom of the base (Rem 700 and HS700) provides a precise fit when bedded to rifle actions, preventing any movement of the base or recoil stress on screws holding the base to the receiver. Our one-piece bases are machined to exact Mil. Std. 1913 specification rail dimensions. This design allows the same scope...
$155.00

... more info