Scope Bases

Property categories:
> Optics


Product Image Item Name  (Desc.) Price
EGW - Base - Remington 788 Standard/Long Action 0 MOA

EGW - Base - Remington 788 Standard/Long Action 0 MOA

Machined from: Domestic 6061 T6 Extruded Aluminum Finish: Matte Black Hardware:  Hex head screws and wrench provided Center Spread:  2.993" Overall Length:  5.882" Our Remington 788 Standard Action and Long Action mounts are made specific to the guns. The middle spread is the distance between the two middle holes, center to center, on your receiver. The middle spread on our...
$53.00

... more info

EGW - Base - Remington 788 Standard/Long Action 20 MOA

EGW - Base - Remington 788 Standard/Long Action 20 MOA

Machined from: Domestic 6061 T6 Extruded Aluminum Finish: Matte Black Hardware:  Hex head screws and wrench provided Center Spread:  2.993" Overall Length:  5.882" Our Remington 788 Standard Action and Long Action mounts are made specific to the guns. The middle spread is the distance between the two middle holes, center to center, on your receiver. The middle spread on our...
$53.00

... more info

EGW - Base - Remington XP/XR 100, Model 7 SA 20 MOA 3-hole

EGW - Base - Remington XP/XR 100, Model 7 SA 20 MOA 3-hole

Machined from: Domestic 6061 T6 Extruded Aluminum Finish: Matte Black Mounting Hardware: Hex head screws and wrench provided Center Spread:  3.627" Overall Length:  5.488" The bolt pattern on this mount will fit the Remington XP/XR 100 and the Remington 7. The 3 hole mount is made for older versions with 3 holes. The 4 hole mount is for the newer versions with 4 holes. This mount is...
$53.00

... more info

EGW - Base - Ruger 10-22 - 20MOA (Also fits Takedown)

EGW - Base - Ruger 10-22 - 20MOA (Also fits Takedown)

Machined from:  Domestic 6061 T6 Extruded Aluminum Finish:  Matte Black Mounting Hardware:  Hex head screws and wrench provided Center Spread:  2.57" Overall Length:  4.645" Our Ruger 10-22 mount is made specific to the gun. This scope mount will fit the 10-22, 10-22 takedown and is lowered to allow for use of rear sight with mount mounted. This mount is available in a 0...
$53.00

... more info

EGW - Base - Ruger 10-22 0 MOA

EGW - Base - Ruger 10-22 0 MOA

Machined from: Domestic 6061 T6 Extruded Aluminum Finish: Matte Black Mounting Hardware: Hex head screws and wrench provided Center Spread: 2.57" Overall Length: 6.276" Our Ruger 10-22 mount is made specific to the gun. This scope mount will not fit the 10-22 takedown. Our 10-22 Takedown mount is available here. *The center spread is the distance between the two middle holes, center to center, on...
$53.00

... more info

EGW - Base - Savage 25

EGW - Base - Savage 25

Machined from: Domestic 6061 T6 Extruded Aluminum Finish: Matte Black Mounting Hardware: Hex head screws and wrench provided Center Spread: 3.987" Overall Length: 7.064" Our Savage 25 mount is made specific to the gun. Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. The channel in the center reduces the...
$48.00

... more info

EGW - Base - Savage 93 (1-5/8" Ejection Port) 0 MOA

EGW - Base - Savage 93 (1-5/8" Ejection Port) 0 MOA

Machined from: Domestic 6061 T6 Extruded Aluminum Finish: Matte Black Mounting Hardware: Hex head screws and wrench provided Center Spread: 3.345" Overall Length: 5.882" This mount comes standard with a bevel on both sides making it ambidextrous. The bolt pattern on this mount works for Savage Mark II and 93 rifles.  The difference between these mounts is the size of the ejection port. ...
$53.00

... more info

EGW - Base - Savage 93 (1-5/8" Ejection Port) 20 MOA

EGW - Base - Savage 93 (1-5/8" Ejection Port) 20 MOA

Machined from: Domestic 6061 T6 Extruded Aluminum Finish: Matte Black Mounting Hardware: Hex head screws and wrench provided Center Spread: 3.345" Overall Length: 5.882" The bolt pattern on this mount works for Savage Mark II and 93 rifles.  The difference between these mounts is the size of the ejection port.  Savage MK II mount - 1-3/8" ejection port The Savage MK II mount will also...
$53.00

... more info

EGW - Base - Savage A17, A22 - 0 MOA

EGW - Base - Savage A17, A22 - 0 MOA

Machined from:  Domestic 6061 T6 Extruded Aluminum Finish:  Matte Black Mounting Hardware:  Hex head screws and wrench provided Center Spread:  3.181" Overall Length:  5.882" Our Savage A17 mount is made specific to the gun. Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. The...
$53.00

... more info

EGW - Base - Savage B. Mag 0 MOA

EGW - Base - Savage B. Mag 0 MOA

Machined from: Domestic 6061 T6 Extruded Aluminum Finish: Matte Black Mounting Hardware: Hex head screws and wrench provided Center Spread: 3.195" Overall Length: 5.882" This scope mount fits the Savage B.Mag. These mounts are available in 0 or 20 MOA. Please see our FAQ section for more information on deciding which MOA is right for you. Picatinny cross slots run the full length of the rail,...
$53.00

... more info

EGW - Base - Savage Flat Back Short Action 0 MOA

EGW - Base - Savage Flat Back Short Action 0 MOA

Machined from: Domestic 6061 T6 Extruded Aluminum Finish: Matte Black Mounting Hardware: Hex head screws and wrench provided Center Spread: 3.930" Overall Length: 6.670" Our Savage Flat Back mount works for short action older model Savage rifles that do not have an accu-trigger. The middle spread is the distance between the two middle holes, center to center, on your receiver. These mounts are...
$53.00

... more info

EGW - Base - Savage Mark II (1-3/8" Ejection Port) 0 MOA

EGW - Base - Savage Mark II (1-3/8" Ejection Port) 0 MOA

Machined from: Domestic 6061 T6 Extruded Aluminum Finish: Matte Black Mounting Hardware: Hex head screws and wrench provided Center Spread: 3.345" Overall Length: 5.882" This mount comes standard with a bevel on both sides making it ambidextrous. The bolt pattern on this mount works for Savage Mark II and 93 rifles. The difference between these mounts is the size of the ejection port. Savage MK...
$53.00

... more info

EGW - Base - Savage Mark II (1-3/8" Ejection Port) 20 MOA

EGW - Base - Savage Mark II (1-3/8" Ejection Port) 20 MOA

Machined from: Domestic 6061 T6 Extruded Aluminum Finish: Matte Black Mounting Hardware: Hex head screws and wrench provided Center Spread: 3.345" Overall Length: 5.882" This mount comes standard with a bevel on both sides making it ambidextrous. The bolt pattern on this mount works for Savage Mark II and 93 rifles. The difference between these mounts is the size of the ejection port. Savage MK...
$53.00

... more info

EGW - Base - Savage Round Back Long Action 0 MOA

EGW - Base - Savage Round Back Long Action 0 MOA

Machined from: Domestic 6061 T6 Extruded Aluminum Finish: Matte Black Mounting Hardware: Hex head screws and wrench provided Center Spread:  4.630" Overall Length:  7.458" This mount comes standard with a bevel on both sides making it ambidextrous. This mount does NOT fit the 212 The 212 mount is available here. Our Savage bases will work with any long action round back Savage rifle...
$53.00

... more info

EGW - Base - Savage Round Back Long Action 20 MOA

EGW - Base - Savage Round Back Long Action 20 MOA

Machined from: Domestic 6061 T6 Extruded Aluminum Finish: Matte Black Mounting Hardware: Hex head screws and wrench provided Center Spread: 4.630" Overall Length: 7.458" Our Savage bases will work with any long action round back Savage rifle with an ejection port. The round back on this mount will accommodate rounded receivers, and guns that have an accu-trigger. Savages without an accu-trigger...
$53.00

... more info

EGW - Base - Savage Round Back Short Action 0 MOA

EGW - Base - Savage Round Back Short Action 0 MOA

Machined from:  Domestic 6061 T6 Extruded Aluminum Finish:  Matte Black  Hardware:  Hex head screws and wrench provided Center Spread:  3.930" Overall Length:  6.670" This mount comes standard with a bevel on both sides making it ambidextrous. This Savage base will work with any short action round back Savage rifle with an ejection port. The round back on this mount...
$53.00

... more info

EGW - Base - Savage Shortened 220 Slug Gun 0 MOA

EGW - Base - Savage Shortened 220 Slug Gun 0 MOA

Machined from: Domestic 6061 T6 Extruded Aluminum Finish: Matte Black Mounting Hardware: Hex head screws and wrench provided Center Spread:  4.630" Overall Length:  6.850" This mount comes standard with a bevel on both sides making it ambidextrous. This mount does NOT fit the 212 The 212 mount is available here The round back on this mount will accommodate rounded receivers, and guns...
$53.00

... more info

EGW - Base - Steel HD Howa 1500 /Wby Vanguard Short Action 0 MOA

EGW - Base - Steel HD Howa 1500 /Wby Vanguard Short Action 0 MOA

Machined From:  4140 Carbon Steel Finish:  Parkerized Compatible with Picatinny or Weaver scope rings.  Mounting Hardware:  Socket Head Torx® Screws and Wrench Provided Center Spread:  3.886" Overall Length of Mount:  6.670" These bases sit at approximately 0.35” high. Picatinny cross slots run the full length of the rail, which gives the shooter...
$118.00

... more info

EGW - Base - T/C Contender 20 MOA

EGW - Base - T/C Contender 20 MOA

Machined from: Domestic 6061 T6 Extruded Aluminum Finish: Matte Black Mounting Hardware: Hex head screws and wrench provided Center Spread: .838" Overall Length: 5.488" Our TC Contender mount is made specific to the gun, and will fit both rifles and pistols *The center spread is the distance between the two middle holes, center to center, on your receiver. This base sits at approximately...
$39.00

... more info

EGW - Base - T/C Encore 0 MOA

EGW - Base - T/C Encore 0 MOA

Machined from: Domestic 6061 T6 Extruded Aluminum Finish: Matte Black Mounting Hardware: Hex head screws and wrench provided Center Spread: .838" Overall Length: 5.488" Our TC Encore mount is made specific to the gun, and will fit both pistols and rifles. *The center spread is the distance between the two middle holes, center to center, on your receiver. This base sits at approximately 0.4”...
$39.00

... more info

EGW - Base - Tikka 595 0 MOA

EGW - Base - Tikka 595 0 MOA

Machined from: Domestic 6061 T6 Extruded Aluminum Finish: Matte Black Mounting Hardware: Hex head screws and wrench provided Center Spread: 3.865" Overall Length: 7.458" Our Tikka 595 mount is made specific to the gun. This mount is available with a 0 or 20 MOA. Please see our FAQ section for more detailed information on MOA. Custom silver anodizing is available upon request, for an additional...
$48.00

... more info

EGW - Base - Tikka 595 20 MOA

EGW - Base - Tikka 595 20 MOA

Machined from:  Domestic 6061 T6 Extruded Aluminum Finish:  Matte Black Mounting Hardware:  Hex head screws and wrench provided Center Spread:  3.865" Overall Length:  7.458" Our Tikka 595 mount is made specific to the gun. This mount is available with a 0 or 20 MOA. Please see our FAQ section for more detailed information on MOA. Custom silver anodizing is available upon...
$53.00

... more info

EGW - Base - Tikka 695 20 MOA

EGW - Base - Tikka 695 20 MOA

Machined from:  Domestic 6061 T6 Extruded Aluminum Finish:  Matte Black Mounting Hardware:  Hex head screws and wrench provided Center Spread:  4.035" Overall Length:  7.458" Our Tikka 695 mount is made specific to the gun. This mount is available with a 0 or 20 MOA. Please see our FAQ section for more detailed information on MOA. Custom silver anodizing is available upon...
$53.00

... more info

EGW - Base - Tikka T3 0 MOA

EGW - Base - Tikka T3 0 MOA

Machined from: Domestic 6061 T6 Extruded Aluminum Finish: Matte Black Mounting Hardware: Hex head screws and wrench provided Center Spread:  3.245" Overall Length:  7.458" Our Tikka T3 mount is made specific to the gun, and will also work with Tikka T3 Lite Rifles. This mount is available with a 0 or 20 MOA. Please see our FAQ section for more detailed information on MOA. Our Tikka T3...
$53.00

... more info

EGW - Base - Tikka T3 20 MOA

EGW - Base - Tikka T3 20 MOA

Machined from: Domestic 6061 T6 Extruded Aluminum Finish: Matte Black Mounting Hardware: Hex head screws and wrench provided Center Spread: 3.245" Overall Length: 7.458" Our Tikka T3 mount is made specific to the gun, and will also work with Tikka T3 Lite Rifles.  This mount is available with a 0 or 20 MOA. Please see our FAQ section for more detailed information on MOA. Our Tikka T3 mount...
$53.00

... more info

EGW - Base - Weatherby Mark V TRR 0 MOA

EGW - Base - Weatherby Mark V TRR 0 MOA

Machined from: Domestic 6061 T6 Extruded Aluminum Finish: Matte Black Mounting Hardware: Hex head screws and wrench provided Center Spread: 4.280" Overall Length: 6.670" Our Weatherby Mark V TRR (Threat Response Rifle) mount is made specific to the gun and ONLY fits the 6 lug Weatherby MK V TRR. The middle spread is the distance between the two middle holes, center to center, on your receiver....
$48.00

... more info

EGW - Base - Weatherby Mark V TRR 20 MOA

EGW - Base - Weatherby Mark V TRR 20 MOA

Machined from:  Domestic 6061 T6 Extruded Aluminum Finish:  Matte Black Mounting Hardware:  Hex head screws and wrench provided Center Spread:  4.280" Overall Length:  6.670" Our Weatherby Mark V TRR (Threat Response Rifle) mount is made specific to the gun and ONLY fits the 6 lug Weatherby MK V TRR. The middle spread is the distance between the two middle holes, center...
$48.00

... more info

EGW - Base - Winchester 70 Short Action 20 MOA

EGW - Base - Winchester 70 Short Action 20 MOA

Machined from:  Domestic 6061 T6 Extruded Aluminum Finish:  Matte Black Mounting Hardware:  Hex head screws and wrench provided Center Spread:  3.259" Overall Length:  6.276" Our Winchester 70 mounts will work for any short action, long action, WSM or WSSM mount.  *The Winchester Coyote edition chambered in .243 will require our WSM mount.*  The middle spread is...
$53.00

... more info

EGW - Base - Winchester 70 STD/Long Action 0 MOA (Pre 64)

EGW - Base - Winchester 70 STD/Long Action 0 MOA (Pre 64)

Machined from:  Domestic 6061 T6 Extruded Aluminum Finish:  Matte Black Mounting Hardware:  Hex head screws and wrench provided Center Spread:  3.805" Overall Length:  7.064" Our Winchester 70 mounts will work for any short action, long action, WSM or WSSM mount.  *The Winchester Coyote edition chambered in .243 will require our WSM mount.*  The middle spread is...
$53.00

... more info

EGW - Base - Winchester XPR Long Action 20MOA Ambidextrous

EGW - Base - Winchester XPR Long Action 20MOA Ambidextrous

Base, Winchester XPR Long Action 20MOA Ambidextrous
$53.00

... more info