An ultra-simple protected sheath which attaches to the top of an automobile's side window, with a small ballhead upon the top. Measures 5.3 x 2.6 x 2.6" ( 133 x 65 x 64mm )Weighs 0.65 lb ( 295g )
Nightforce standard bases are a quality, affordable solution for those looking to ensure their scope is firmly mounted to their rifle.These aluminum bases are machined to Mil. Std. 1913 rail specifications and hard anodized.
Nightforce standard bases are a quality, affordable solution for those looking to ensure their scope is firmly mounted to their rifle.These aluminum bases are machined to Mil. Std. 1913 rail specifications and hard anodized.
Nightforce standard bases are a quality, affordable solution for those looking to ensure their scope is firmly mounted to their rifle.These aluminum bases are machined to Mil. Std. 1913 rail specifications and hard anodized.
Nightforce standard bases are a quality, affordable solution for those looking to ensure their scope is firmly mounted to their rifle.These aluminum bases are machined to Mil. Std. 1913 rail specifications and hard anodized.
Nightforce standard bases are a quality, affordable solution for those looking to ensure their scope is firmly mounted to their rifle.These aluminum bases are machined to Mil. Std. 1913 rail specifications and hard anodized.
X-Treme Duty - Ultralite™ One-Piece Magmount (Titanium/Alloy) The Ultralite™ MagMount™ adds a third crossbolt for even greater protection against recoil. It is offered in 1.375” height/30mm diameter and 1.44″ height/34mm diameter versions. The height of the Ultralite™ MagMount™ allows clearance of 56mm objective riflescopes when mounted on a...
X-Treme Duty - Ultralite™ One-Piece Magmount (Titanium/Alloy) The Ultralite™ MagMount™ adds a third crossbolt for even greater protection against recoil. It is offered in 1.375” height/30mm diameter and 1.44″ height/34mm diameter versions. The height of the Ultralite™ MagMount™ allows clearance of 56mm objective riflescopes when mounted on a...
The Nightforce Unimount is designed to remain on the scope at all times, allowing quick removal of the scope or interfacing with different firearms. It is the most accurate Mil. Std. 1913 mount available, incorporating a built-in 20 MOA taper to maximize long-range capability. The Unimount is the ultimate mount for attaching to weapons with an integral Mil. Std. 1913 flat top-type receiver....
The Nightforce Unimount is designed to remain on the scope at all times, allowing quick removal of the scope or interfacing with different firearms. It is the most accurate Mil. Std. 1913 mount available, incorporating a built-in 20 MOA taper to maximize long-range capability. The Unimount is the ultimate mount for attaching to weapons with an integral Mil. Std. 1913 flat top-type receiver....
Package Damaged Nightforce Ruggedized Accessory Platform 30 mm - 6 Screw with Cradle The RAP™ (Ruggedized Accessory Platform) provides four inches of Mil. Std. 1913 rail space above your riflescope for the mounting of lasers, illumination tools and other accessories. Replacing the top half of Nightforce four- and six-screw X-Treme Duty™ rings, the RAP will withstand heavy recoil...
An integral recoil lug machined on the bottom of the base (Rem 700 and HS700) provides a precise fit when bedded to rifle actions, preventing any movement of the base or recoil stress on screws holding the base to the receiver.Our one-piece bases are machined to exact Mil. Std. 1913 specification rail dimensions. This design allows the same scope to be used on several different rifles, always...
The new Nightforce MultiMount™ was originally designed as a platform for close-range sights to be mounted in conjunction with a primary riflescope. The MultiMount™ offers far more versatility, however, functioning as a user-configurable system providing a rock-solid base for any Mil. Std. 1913 accessory that will fit. Designed to replace the top half of an X-Treme...
The new Nightforce MultiMount™ was originally designed as a platform for close-range sights to be mounted in conjunction with a primary riflescope. The MultiMount™ offers far more versatility, however, functioning as a user-configurable system providing a rock-solid base for any Mil. Std. 1913 accessory that will fit. Designed to replace the top half of an X-Treme...
The Ultralite™ MagMount™ adds a third crossbolt for even greater protection against recoil. It is offered in 1.375†height/30mm diameter and 1.44″ height/34mm diameter versions. The height of the Ultralite™ MagMount™ allows clearance of 56mm objective riflescopes when mounted on a continuous rail....
Sav LA New Style - 1 pc - 20 MOA (6-48 screws) An integral recoil lug machined on the bottom of the base (Rem 700 and HS700) provides a precise fit when bedded to rifle actions, preventing any movement of the base or recoil stress on screws holding the base to the receiver. Our one-piece bases are machined to exact Mil. Std. 1913 specification rail dimensions. This design allows the same scope to...
Base, H-S SA 700 - 20 MOA - 8-40 thread An integral recoil lug machined on the bottom of the base (Rem 700 and HS700) provides a precise fit when bedded to rifle actions, preventing any movement of the base or recoil stress on screws holding the base to the receiver.Our one-piece bases are machined to exact Mil. Std. 1913 specification rail dimensions. This design allows the same scope to be used...
HS 700 LA - 1 pc. - 20 MOA (8-40 screws) An integral recoil lug machined on the bottom of the base (Rem 700 and HS700) provides a precise fit when bedded to rifle actions, preventing any movement of the base or recoil stress on screws holding the base to the receiver.Our one-piece bases are machined to exact Mil. Std. 1913 specification rail dimensions. This design allows the same scope to be...
An integral recoil lug machined on the bottom of the base (Rem 700 and HS700) provides a precise fit when bedded to rifle actions, preventing any movement of the base or recoil stress on screws holding the base to the receiver.Our one-piece bases are machined to exact Mil. Std. 1913 specification rail dimensions. This design allows the same scope to be used on several different rifles, always...
An integral recoil lug machined on the bottom of the base (Rem 700 and HS700) provides a precise fit when bedded to rifle actions, preventing any movement of the base or recoil stress on screws holding the base to the receiver.Our one-piece bases are machined to exact Mil. Std. 1913 specification rail dimensions. This design allows the same scope to be used on several different rifles, always...
An integral recoil lug machined on the bottom of the base (Rem 700 and HS700) provides a precise fit when bedded to rifle actions, preventing any movement of the base or recoil stress on screws holding the base to the receiver.Our one-piece bases are machined to exact Mil. Std. 1913 specification rail dimensions. This design allows the same scope to be used on several different rifles, always...
![Nightforce - Unimount, 1.5\", 20 MOA, 30mm](images/atrex/nf_a221.jpg "Nightforce - Unimount, 1.5\\", 20 MOA, 30mm")
![Nightforce - Unimount 1.50\" - 20 MOA - 34mm](images/atrex/nf_a357.jpg "Nightforce - Unimount 1.50\\" - 20 MOA - 34mm")
![Nightforce - MagMount 1.44\", 0 MOA, 3 Jaw/Nut, 34mm](images/atrex/nf_a162.jpg "Nightforce - MagMount 1.44\\", 0 MOA, 3 Jaw/Nut, 34mm")
