Equipment

Property categories:
> Reloading


Product Image Item Name  (Desc.) Price
Case Trimmer PILOT .40 CALIBER

Case Trimmer PILOT .40 CALIBER

RCBS® Case Trimmer Pilots are tapered to guide pilot into the case mouth. The design prevents a case from wobbling when being trimmed to length. For use with RCBS® Trim Pro® Case Trimmers, Rotary Case Trimmer—2 and Rotary Case Trimmer. For use with RCBS Case Trimmers only.
$8.00

... more info

CASE TRIMMER SHELL HOLDER #27

CASE TRIMMER SHELL HOLDER #27

RCBS® Trim Pro Case Trimmers feature uniquely shaped shell holders to firmly hold rifle and pistol cases in perfect alignment with the cutter. This system allows for accurate and repeatable case trimming lengths and leaves the case mouths square to the body. Trim Pro Shell Holders are numbered the same as standard shell holders to simplify identification and use. They’re available...
$10.00

... more info

Chargemaster 1500

Chargemaster 1500

The ChargeMaster 1500 Scale lets you weigh powder, bullets, cases or even loaded cartridges. An easy-to-read display shows weight in grains or grams and is accurate to ± 1/10 of a grain. You can easily weigh powder in amounts from 2 to 300 grains. Can be added to the ChargeMaster Powder Dispenser to create an unmatched combination of speed and accuracy. Fast and easy to calibrate, includes...
$247.00

... more info

DEBURRING TOOL .17-.45 CAL

DEBURRING TOOL .17-.45 CAL

The Deburring Tool allows the inside and outside chamfering and deburring of cases. Made of hardened steel to last a lifetime.
$26.00

... more info

Decap Unit - .264/6.5mm

Decap Unit - .264/6.5mm

This unit features an expander rod and ball and a decapping pin. It’s used with sizing dies to de-prime the case and expand the neck in bottleneck cartridges.
$10.00

... more info

Decap Unit - 6.5MM T/CU

Decap Unit - 6.5MM T/CU

The RCBS® Tapered Expander-Decapping Unit replaces the stem in RCBS expander-decapping die
$10.00

... more info

Decapping Pin Long

Decapping Pin Long

Spare/replacement Decapping Pin Long fits Full Length, Bushing Bump & Neck Sizing Dies (1" long).
$0.85

... more info

Forster - .223 Headspace Go Gauge

Forster - .223 Headspace Go Gauge

This gage also checks 6 x 45 chambers. Every gunsmith knows that proper use of a headspace gage is the most reliable way to test the length of a rifle chamber. “Headspace” is the distance between the face of the breech and the base of the cartridge when the action is closed, and excessive headspace can be dangerous as well as impair accuracy. For instance, unsupported brass fired in a...
$42.00

... more info

Forster - .224 Seater Die Bullet Seating Stem

Forster - .224 Seater Die Bullet Seating Stem

224 BR Die Seating Stem
$13.00

... more info

Forster - .284 Headspace No Go Gauge

Forster - .284 Headspace No Go Gauge

This gage also checks 22-284, 6mm-284, 25-284, 6.5 -284, 270-284, 30-284, 35-284 chambers Every gunsmith knows that proper use of a headspace gage is the most reliable way to test the length of a rifle chamber. “Headspace” is the distance between the face of the breech and the base of the cartridge when the action is closed, and excessive headspace can be dangerous as well as impair...
$42.00

... more info

Forster - .308 VLD Ultra Die Seating Stem

Forster - .308 VLD Ultra Die Seating Stem

308 VLD Ultra Die Seating Stem
$10.00

... more info

Forster - "LS" Lower Shell Holder Jaws for Co-AxR Press

Forster - "LS" Lower Shell Holder Jaws for Co-AxR Press

"LS" Shell Holder Jaws, fits a variety of calibers (Press Accessory). When we originally tested our unique shell holder design, we full length sized two-hundred once-fired 300 H&H Magnum cases dry and unlubricated. We neither pulled the rims off the cases nor did we stick a case in the die. The heads of the cases and rims were unmarked by the shell holder jaws because the shell holder...
$44.00

... more info

Forster - "S" Lower Shell Holder Jaws for Co-AxR Press

Forster - "S" Lower Shell Holder Jaws for Co-AxR Press

“S” Shell Holder Jaws (spare / replacement), fits a variety of calibers. When we originally tested our unique shell holder design, we full length sized two-hundred once-fired 300 H&H Magnum cases dry and unlubricated. We neither pulled the rims off the cases nor did we stick a case in the die. The heads of the cases and rims were unmarked by the shell holder jaws because the shell...
$49.00

... more info

Forster - 3 in 1 Case Mouth Cutter for .243 (6mm)

Forster - 3 in 1 Case Mouth Cutter for .243 (6mm)

The innovative 3-in-1 Case Mouth Cutter combines case trimming, inside deburring and outside deburring into one easy step. Long-lasting carbide blades simultaneously perform three functions to save time and improve consistency: Trims the case to length. Chamfers the inside case mouth to an angle of 14°. Chamfers the outside case mouth to an angle of 30°. The Cutter mounts on an Original...
$89.00

... more info

Forster - 3-in-1 Case Mouth Cutter for .224

Forster - 3-in-1 Case Mouth Cutter for .224

The innovative 3-in-1 Case Mouth Cutter combines case trimming, inside deburring and outside deburring into one easy step. Long-lasting carbide blades simultaneously perform three functions to save time and improve consistency: Trims the case to length. Chamfers the inside case mouth to an angle of 14A?. Chamfers the outside case mouth to an angle of 30A?. The Cutter mounts on an Original or...
$89.00

... more info

Forster - 3-in-1 Case Mouth Cutter for .264 (6.5mm)

Forster - 3-in-1 Case Mouth Cutter for .264 (6.5mm)

The innovative 3-in-1 Case Mouth Cutter combines case trimming, inside deburring and outside deburring into one easy step. Long-lasting carbide blades simultaneously perform three functions to save time and improve consistency: Trims the case to length. Chamfers the inside case mouth to an angle of 14°. Chamfers the outside case mouth to an angle of 30°. The Cutter mounts on an Original...
$95.00

... more info

Forster - 3-in-1 Case Mouth Cutter for .284 (7mm)

Forster - 3-in-1 Case Mouth Cutter for .284 (7mm)

The innovative 3-in-1 Case Mouth Cutter combines case trimming, inside deburring and outside deburring into one easy step. Long-lasting carbide blades simultaneously perform three functions to save time and improve consistency: Trims the case to length. Chamfers the inside case mouth to an angle of 14°. Chamfers the outside case mouth to an angle of 30°. The Cutter mounts on an Original...
$89.00

... more info

Forster - 3-in-1 Case Mouth Cutter for .308

Forster - 3-in-1 Case Mouth Cutter for .308

The innovative 3-in-1 Case Mouth Cutter combines case trimming, inside deburring and outside deburring into one easy step. Long-lasting carbide blades simultaneously perform three functions to save time and improve consistency: Trims the case to length. Chamfers the inside case mouth to an angle of 14°. Chamfers the outside case mouth to an angle of 30°. The Cutter mounts on an Original...
$89.00

... more info

Forster - 6x47 Lapua Bench Rest Seater Die

Forster - 6x47 Lapua Bench Rest Seater Die

Non-crimping style provides accuracy, consistency and perfect alignment. Years ago, Forster/Bonanza obtained U.S. Patent #3,440,923 for the design of the original Bench Rest® Seater Die. That patent covered the use of a specially machined, close fitting chamber that holds the case, the bullet and the seating stem all in perfect alignment. This innovative chamber design is still the hallmark...
$75.00

... more info

Forster - Accessory Case for Case Trimmer Parts

Forster - Accessory Case for Case Trimmer Parts

The perfect solution for keeping your Case Trimmer accessories organized and protected. Storage holes for accessories (sold separately): Four Original Case Trimmer Collets: #1, #2, #3, #4 (does not accommodate Classic Case Trimmer Collets #5, #6, #7, #8) 12 Pilots or Neck Reamers in any combination One Outside Neck Turner (body, feeder cam, cam follower) One Primer Pocket Chamfering Tool with one...
$20.00

... more info

Forster - Bullet/Cartridge Dial #1

Forster - Bullet/Cartridge Dial #1

When used in conjunction with the Datum Dial (DD1010) the tool measures the relative distance of a bullet or cartridge to a point on the bullet's ogive. For 224, 243, 264, 284, and 308 bullets. May be used: Before seating operations to check factory bullet/cartridge consistency. After seating operations to check the setup and consistency of your reloading process. Case and bullet/cartridge...
$29.00

... more info

Forster - Bullet/Cartridge Dial #2

Forster - Bullet/Cartridge Dial #2

When used in conjunction with the Datum Dial (DD1010) the tool measures the relative distance of a bullet or cartridge to a point on the bullet's ogive. For 17, 204, 257, 277, and 338 bullets. May be used: Before seating operations to check factory bullet/cartridge consistency. After seating operations to check the setup and consistency of your reloading process. Case and bullet/cartridge...
$29.00

... more info

Forster - Case Neck Graphiter

Forster - Case Neck Graphiter

When sizing a fired case, pulling the expander button through the case can present a problem because residual deposits left from firing can create friction when the expander is withdrawn. In a worst case scenario, that friction can cause distortion or stretching of the case neck. Properly lubricating the inside diameter of your case necks is the answer, but oils are not recommended because of the...
$26.00

... more info

Forster - Centre for Primer Pocket Cleaner

Forster - Centre for Primer Pocket Cleaner

Centre for Primer Pocket Cleaner. Use with the Primer Pocket Chamfering Tool or a Primer Pocket Cleaner to support the case mouth. Mounts in the collet side of your Case Trimmer.
$10.00

... more info

Forster - Classic Case Trimmer

Forster - Classic Case Trimmer

The Classic Case Trimmer is designed for more than 300 big bore calibers from popular big game rifles to classic black powder calibers. For collectors of vintage firearms, for "cowboy" competitors and reenactors, and for owners of fine English single and double rifles chambered in hard-hitting calibers like 500 Nitro Express, .416 Rigby, 50 Sharps, or .475 Nitro Exp, this is the hand case trimmer...
$120.00

... more info

Forster - Co-Ax Case & Cartridge Inspector

Forster - Co-Ax Case & Cartridge Inspector

Accurate performance from your ammunition is absolutely dependent on uniformity of both the bullet and the case. Achieving that uniformity is not possible without an accurate, reliable measuring device. Forster's exclusive Co-AxAR Case & Cartridge Inspector provides you with the ability to ensure uniformity by measuring three critical dimensions: Neck wall thickness, Case neck concentricity,...
$140.00

... more info

Forster - Co-Ax Primer Seater

Forster - Co-Ax Primer Seater

There are other primer seaters on the market, but none quite like our exclusive Forster Co-Ax® Primer Seater. Unlike other seaters, ours is designed so the operator can eliminate all slop when working with a specific cartridge. That translates into perfect seating, reliable ignition and reduced misfires. No additional shell holders are required. The E-Z-Just jaws close to securely grip most...
$123.00

... more info

Forster - Co-Ax Shell Holder Jaw Housing

Forster - Co-Ax Shell Holder Jaw Housing

Shell Holder Jaw Housing
$19.00

... more info

Forster - Cover for Co-AX Press

Forster - Cover for Co-AX Press

Co-AxAR Press Cover (soft cover w/ drawstring). Protect your Co-Ax reloading press from dust and dirt with this attractive black cover. Top closure is a draw cord with a lock and bottom has a snug fitting elastic closure. Made from breathable 420 D Nylon which helps prevent moisture buildup.
$22.00

... more info

Forster - Cross Bolt Die Lock Ring (Single)

Forster - Cross Bolt Die Lock Ring (Single)

Improvement to Cross Bolt Die Lock Rings. A socket cap screw is now used to lock the ring in place. The improvement allows you to make fine adjustments without "pushing" on the ring as you are snugging it up. Fits any standard 7/8" x 14 dies. Forster Products has solved two problems common to many reloaders: misaligned die locking rings and damaged die threads. Either of those situations can...
$9.00

... more info